 |
 |
Maintenance
Coatings for all industrial environments. Maintenance products
for repairing & rebuilding plant equipment |
 |
| |
A flexible, low viscosity, easy to use coating system,
which can be used for oil, or other storage tanks where
good chemical resistance is required. |
 |
Pot
Life
(minutes) |
Density
(g/ml) |
Mix
Ratio by
Weight 1 |
Mix
Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.15 |
3:2 |
2:1 |
10-25 |
Number
of
Coats |
Max
DFT
(mils) |
Minimum
Application
Temp (F/C) |
Max
Dry Operating Temp (F/C) |
Dry
to Touch
(hours) |
| 2-3 |
125 |
40/4 |
275/135 |
10 |
Recoat
Time
(min/max hours) |
Functional
Cure 2
(hours) |
Full
Cure
(hours) |
Repair
System |
Surface
Preparation
Methods 3 |
| 8/120 |
60 |
120 |
EAC |
SSPC-6 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,3 |
2.5-14 |
|
|
|
A low viscosity, DOT non-corrosive version of the
HPL-1110 which can be used for dirty water systems or
mild to medium concentrations of inorganic acids and
caustics at ambient temperature. Not recommended for
petroleum based product storage. |
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.15 |
3:2 |
2:1 |
10-25 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
125 |
40/4 |
275/135 |
9 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 8/120 |
60 |
120 |
EAC |
SSPC-6 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,3 |
2.5-13 |
|
|
|
A moisture tolerant concrete sealer used to restore
the integrity of old concrete or prevent outgassing prior
to the installation of the topcoat. It can also be used
as a clear topcoat. |
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 60 |
1.08 |
9:4 |
2:1 |
5 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
5 |
35/2 |
250/122 |
8 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 8/72 |
48 |
24 |
N/A |
SSPC-1,7 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,3 |
3.0-12 |
|
|
|
A low viscosity holding primer for steel surfaces
allowing for extremely long overcoat windows. |
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.07 |
2:1 |
1.8:1 |
2 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
5 |
50 |
300/150 |
6 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 6/120 |
36 |
120 |
N/A |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,3 |
2.5-14 |
|
|
|
A medium viscosity coating designed to be an environmentally
safe replacement for conventional coal tar epoxies. Can
be thinned with solvents if necessary. |
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 30 |
1.26 |
3.5:1 |
2.5:1 |
10 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
125 |
60/15 |
300/150 |
6 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 6/36 |
36 |
120 |
EAC |
SSPC-6 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,2 |
2.5-14 |
|
|
|
A trowelable material which is designed to rebuild
and/or protect tanks subject to erosion and corrosion.
It is best applied using a mastic or grout pump. |
 |
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.6 |
2:1 |
2:1 |
75 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1-2 |
250 |
55/13 |
375/190 |
6 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 6/36 |
36 |
120 |
SAR |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,2,5 |
2.5-14 |
|
|
|
A low temperature, fast curing, moderately low viscosity
product with outstanding abrasion and chemical resistance.
It can be used for process vessels, baghouse or precipitator
walls, coal bunkers, or flooring. It is designed to be
applied by hand or with plural component spray equipment.
|
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 20 |
1.67 |
5:1 |
2.7:1 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
60 |
40/4 |
375/190 |
3 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 3/24 |
18 |
120 |
EAC |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,4 |
1.5-14 |
|
|
|
A medium viscosity product with outstanding abrasion
resistance, impact resistance, and flexibility. It can
be used for rail cars, ash hoppers, slurry tanks, secondary
containment, traveling water screens, or anywhere requiring
flexibility, abrasion and chemical resistance. It is designed
to be applied by hand or with plural component spray equipment.
|
 |
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.61 |
4:1 |
2:1 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
60 |
40/4 |
375/190 |
4 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 3/24 |
24 |
120 |
EAC |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,4 |
1.5-14 |
|
|
|
A low viscosity, long potlife coating with excellent
chemical resistance in an ambient cured material. It is
designed to be applied by brush, roller or with conventional
airless equipment. |
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.27 |
4.2:1 |
3:1 |
10 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
80 |
60/15 |
350/175 |
8 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 8/72 |
48 |
120 |
EXP |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,3 |
1.0-14 |
|
|
|
An outstanding, versatile and easy to use 100% solids
material. It can be used for circulating water pipe, sewage
treatment systems, or process water tanks. It can be applied
by brush, roller or with conventional spray equipment.
Also available in FDA compliant versions.
|
 |
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.24 |
2.4:1 |
1.8:1 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
250 |
60/15 |
275/132 |
8 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 6/120 |
48 |
129 |
EAC |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,3 |
2.0-14 |
|
|
|
A moisture tolerant version of the HPL-2510 which
can be applied to dams, concrete structures, or tanks
by roller or brush using divers. |
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 40 |
1.18 |
3:2 |
6:5 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
60 |
40/4 |
250/122 |
12 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 12/24 |
72 |
120 |
SAR-UW |
SSPC-6 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1 |
2.5-14 |
|
|
|
A fast curing bis-phenol F epoxy used primarily for
secondary containment where excellent chemical resistance
to sulfuric and other inorganic acids is required at ambient
cure temperatures. |
 |
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 30 |
1.29 |
2.8:1 |
2:1 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
60 |
40/4 |
375/190 |
7 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 6/48 |
42 |
120 |
EXP |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,4 |
0.5-14 |
|
|
|
A high-temperature, abrasion resistant, trowel applied
product for boiler skirts, incinerator outlets or anywhere
requiring resistance to abrasive elements at high temperatures.
|
 |
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 30 |
1.81 |
2.5:1 |
2:1 |
60 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1-2 |
125 |
65/18 |
450/232 |
3 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 3/24 |
48 |
168 |
EXP-THIXSET |
SSPC-5 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 2 |
0.5-14 |
|
|
|
A high functionality,100% solids novolac material
which can be applied by conventional airless spray equipment.
It can be used in power plant outlet ducts, utility FGD
systems, petrochemical and acid storage tanks, or anywhere
requiring outstanding chemical resistance in an easy to
apply coating system. |
 |
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.32 |
3.6:1 |
2.5:1 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
80 |
65/18 |
375/190 |
8 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 8/72 |
72 |
168 |
EXP |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,3 |
0.5-14 |
|
|
|
A high functionality, 100% solids novolac material,
designed for concentrated sulfuric acid and other inorganic
acid service. It can be applied by hand but is most efficiently
applied over large areas by plural component airless.
|
 |
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 20 |
1.41 |
3:1 |
2:1 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
60 |
65/18 |
400/205 |
3 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 3/24 |
48 |
168 |
EXP |
SSPC-5 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,4 |
0.5-14 |
|
|
|
A special version of the HPL-4320 designed for methylene
chloride and other solvents. Requires elevated temperature
cure. |
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 25 |
1.12 |
4.7:1 |
3.4:1 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
80 |
65/18 |
375/190 |
3 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 3/24 |
48 |
168 |
EXP |
SSPC-5 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,4 |
0.5-14 |
|
|
|
A flexiblized version of the HPL-4320 used for secondary
containment, ductwork or anywhere requiring better flexibility
with extremely good chemical resistance. |
 |
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 45 |
1.32 |
2.8:1 |
2:1 |
15 |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 2-3 |
60 |
65/18 |
350/176 |
12 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| 12/48 |
72 |
168 |
EXP |
SSPC-10 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 1,4 |
0.5-14 |
|
|
|
A very fast reacting, polyurea material used for secondary
containment or conveyor beltcoatings. Surfaces coated
with this material can be put back into service in a matter
of hours. This coating, must be applied using plural
component spray equipment and special plural component
spray guns. |
|
Pot Life
(minutes) |
Density
(g/ml) |
Mix Ratio by
Weight1 |
Mix Ratio by
Volume 1 |
Thick/Coat
(mils) |
| 1 |
1.21 |
1.2:1 |
1:1 |
as
needed |
Number of
Coats |
Max DFT
(mils) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
as
needed |
20/-6 |
350/150 |
1
minute |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Repair
System |
Surface Preparation
Methods 3 |
| n/a |
24 |
24 |
DUROTHANE |
SSPC-5 |
Application
Procedure 4 |
pH
Range 5 |
|
|
|
| 4 |
3.0-10 |
|
|
|
|
|
|
|
