|
The
solution to your corrosion or waterproofing problems
   
The
100% solid polyurea coating technology is here to replace
the conventional coatings dominating the industry today.
It is easier and faster to apply, more economical and
offers greater longevity. Recent technological developments
have allowed polyurethane manufacturers to produce 100%
solid, instant setting, components, highly cross-linked
additive free, polyurea coating suitable for potable water,
chemical tanks, vessels, bridges or any kind of structure
where adverse weather conditions prevail.
 Waterproof
your containment with the PolyFlex system.
When we apply PolyFlex in containment, we build a monolithic
membrane, with
no joint on all surfaces and around penetrations. With
that system, you reduce
your chances of leaks to a strict minimum
 Corrosion
and abrasion protection with the PolyFlex system.
It is by "ENCAPSULATION" that the PolyFlex system
protects your equipment against corrosion and abrasion.
The absence of oxygen between PolyFlex and substrate stop
the expansion of corrosion. With more than 800% elongation,
the monolithic membrane of PolyFlex supports a wide range
of temperatures without blistering (i.e. freezing and
thawing)
APPLICATIONS
- Liners
for concrete tanks, ponds, lagoons, reservoirs,
dikes, renches, tunnels, banks,etc.
- Replace
or repiar failed existing liners.
- Steel
tanks (exterior or underground), silos and pipes.
- Protective
elastomer for sprayed in place erehane foam.
- Protective
membrane for roofing.
- Containment
for PCB, asbestos, lead paint and other toxic
materials.
- Protective
coaing for decorating products such as props,
waterfalls, signs, statues, highway marking,etc.
- Corrosion
protection of floors and walls subject to corrosive
spill.
- Anti-abrasive
membrane for mining equipment, crushers, dump
truck and pick-up truck bed liners.
- Protection
for refrigerated salt water tanks (fishing boats).
|
ADVANTAGES
- Due
to absence of solvent, polyurea is not flammable.
- The
instant setting allows to restart the equipment
right after the application (minimum shutdown
delays)
- Electrical
insulator that eliminates ignition sparks that
could cause an explosion in flammable environment.
(also for the explosives carriers).
- PolyFlex
is very versitile, it prevents corrosion, abrasion
and waterproof problems.
- PolyFlex
comes in a wide range of hardness (from shore
A70 to shore D75), therefore it can be adapted
to most customer needs and can face up the utilisation
constraints.
- Can
support service temperature up to 350 degrees
farenheit.
- The
total application cost of the polyurea is 20%
lower than conventional coatings. This saving
is due to the short application time, and polyurea
will last 30% longer than conventional coatings.
- Polyurea
has a greater resistance to de-icing salt, UV
rays, and other chemical products.
- Available
in a wide range of colors.
- Desired
thickness in only one application.
- Generating
its own heat, it can be applied at almost any
temperature (down to minus 40 degrees farenheit).
No toxic vapour, VOC'S and 100% solids.
|
|
