 |
Primers
& Sealers
Seals & Protects ·
Strengthens · Reduces Dusting · High Gloss ·
VOC Compliant
 The
best flooring system installations start with a coat of primer
that seals and strengthens your floors—creating a uniform
bonding surface for subsequent applications. We've found that
using a low-viscosity primer coat that soaks into the surface
of the substrate handles more easily and aids in the prevention
of "outgassing," which can occur with more viscous
coatings. Upon curing, Dur-A-Flex® epoxy and the Cryl-A-Flex®
methyl methacrylate (MMA) primer systems form a tough, smooth
surface which stops concrete "dusting," a common respiratory
health and environmental concern wherever you find new or unprotected
concrete flooring.
Dur-A-Shield #2TM
Dur-A-Shield #2 is a two component epoxy primer / sealer designed
for penetrating and sealing concrete floors.
Dur-A-Poxy High GlossTM
Dur-A-Poxy High Gloss is a two component, water borne, emulsion
type epoxy primer / sealer designed to seal new or existing concrete
floors.
Dur-A-Glaze Tie-CoatTM
Dur-A-Glaze Tie-Coat is a clear, two component epoxy designed
to enhance the adhesion of a new coating to surfaces that are
typically hard to bond together.
Super-StickTM
Super-Stick is a special liquid additive that enhances the adhesion
of an epoxy resin to certain substrates. The addition of Super-Stick
to the prime coat is recommended when applying an epoxy coating
on ceramic tile, quarry tile and existing epoxy.
Dur-A-Glaze #4 ESD PrimerTM
DUR-A-GLAZE #4 ESD PRIMER is a 2-component, 100% solids Static
Dissipative Primer. This coating was designed as a concrete primer
for DUR-A-GARD ESD.
Cryl-A-Prime P-101TM
Cryl-A-Prime P-101 is a 100% solids, fast curing, high strength
methyl methacrylate (MMA) based, acrylic reactive resin. It
is formulated to form a cohesive bond with the substrate.
Cryl-A-CureTM
Cryl-A-Cure is the initiator used for the polymerization of
all Cryl-A-Flex methyl methacrylate (MMA)based resins and Cryl-A-Tex
polymer concrete. It is supplied in the form of free flowing
fine white granules which is added to the resin in small amounts
|
 |
