| |
|
A specially formulated 100% solids epoxy grout used to fill large holes or rebuilding severely damaged concrete substrates. It can be applied up to 1 foot thickness in a single pour. Chemfil can also be used as a base for other topcoats where additional chemical resistance or smoothness is required.
|
Density
(g/ml) |
Coverage
(in 3/kg) |
Mix Ratio by
Weight 1 |
Mix Ratio by
Volume 1 |
Max/Min
Build/Coat (mils) |
| 2.21 |
28 |
3.6:1 |
3:1 |
12,000/125 |
Number of
Coats |
Working Time
(minutes) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
30 |
65/18 |
250/122 |
1 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Surface Preparation
Methods 3 |
pH Range 5 |
| 1/4 |
24 |
72 |
SSPC-1,3,11 |
2.5-12 |
|
A rugged and durable 100% solids epoxy material used for patching concrete floors, equipment pads, or containment walls. It is supplied as a three part mix and can be built up to a thickness of 2 inches.
|
Density
(g/ml) |
Coverage
(in 3/kg) |
Mix Ratio by
Weight 1 |
Mix Ratio by
Volume 1 |
Max/Min
Build/Coat (mils) |
| 2.02 |
20 |
2:1 |
1.8:1 |
2,000/60 |
Number of
Coats |
Working Time
(minutes) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
30 |
40/4 |
250/122 |
1 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Surface Preparation
Methods 3 |
pH Range 5 |
| 1/4 |
24 |
72 |
SSPC-1,3,11 |
2.0-14 |
|
A pourable three part system that is designed as a complete self leveling floor system with excellent chemical resistance and compressive strengths. It can be applied at a thickness of up to two inches on horizontal surfaces. It can also be used for producing chemical resistant equipment pads of up to six inches in depth.
|
Density
(g/ml) |
Coverage
(in 3/kg) |
Mix Ratio by
Weight 1 |
Mix Ratio by
Volume 1 |
Max/Min
Build/Coat (mils) |
| 1.94 |
20 |
3.3:1 |
2.2:1 |
6000/60 |
Number of
Coats |
Working Time
(minutes) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
20 |
40/4 |
250/122 |
1 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Surface Preparation
Methods 3 |
pH Range 5 |
| 1/4 |
24 |
72 |
SSPC-1,3,11 |
2.0-14 |
|
A more chemical resistant version of the Chemcrete Pourable used in areas where severe chemical spills are common.
|
Density
(g/ml) |
Coverage
(in 3/kg) |
Mix Ratio by
Weight 1 |
Mix Ratio by
Volume 1 |
Max/Min
Build/Coat (mils) |
| 2.08 |
20 |
2.8:1 |
1.8:1 |
2000/60 |
Number of
Coats |
Working Time
(minutes) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
20 |
50/10 |
375/190 |
2 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Surface Preparation
Methods 3 |
pH Range 5 |
| 1/4 |
24 |
120 |
SSPC-1,3,11 |
0-5-14 |
| LININLining ProductsG PRODUCTS |
| Most of our 100% coating products can be used to overcoat a properly cleaned and dry floor. However, some products, because of their moisture tolerance, flexibility, fast and low temperature curing capability, are better for flooring applications than others. Listed below are some of those materials. |
| |
|
A moisture tolerant, 100% solids material which can be applied at temperatures as low as 35F. It is primarily used to seal concrete prior to overcoating to prevent out-gassing sealer. It can also be used as a means to regain some structural strength in old concrete or to prevent water penetration.
|
Density
(g/ml) |
Coverage
(sq ft/kg @ 40mils) |
Mix Ratio by
Weight 1 |
Mix Ratio by
Volume 1 |
Max/Min
Build/Coat (mils) |
| 1.08 |
40 |
9:4 |
2:1 |
5/2 |
Number of
Coats |
Working Time
(minutes) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
60 |
35/2 |
250/12 |
8 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Surface Preparation
Methods 3 |
pH Range 5 |
| 8/72 |
48 |
120 |
SSPC-1,3,11 |
3.0-12 |
|
A very flexible, moisture tolerant, fast curing material which can be applied at temperatures as low as 40F with good chemical and abrasion resistance.
|
Density
(g/ml) |
Coverage
(sq ft/kg @ 40mils) |
Mix Ratio by
Weight 1 |
Mix Ratio by
Volume 1 |
Max/Min
Build/Coat (mils) |
| 1.61 |
40 |
4:1 |
2:1 |
80/10 |
Number of
Coats |
Working Time
(minutes) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1-2 |
45 |
40/4 |
375/190 |
3 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Surface Preparation
Methods 3 |
pH Range 5 |
| 3/24 |
24 |
120 |
SSPC-1,3,11 |
1.5-14 |
|
A bis-phenol F material which can be easily applied to large concrete surfaces with or without a sealer. It also develops its chemical resistant properties at a faster rate than conventional novolac-based products.
|
Density
(g/ml) |
Coverage
(sq ft/kg @ 40mils) |
Mix Ratio by
Weight 1 |
Mix Ratio by
Volume 1 |
Max/Min
Build/Coat (mils) |
| 1.29 |
40 |
2.8:1 |
2:1 |
80/10 |
Number of
Coats |
Working Time
(minutes) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1-2 |
45 |
40/4 |
375/190 |
7 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Surface Preparation
Methods 3 |
pH Range 5 |
| 6/48 |
42 |
120 |
SSPC-1,3,11 |
0.5-14 |
|
An extremely rugged, anti-slip floor coating system, which is completely self contained, requiring no additional sand or broadcasting of materials. The texture of the surface can be changed from one suitable for shower room floors to one which will provide slip resistance for industrial forklift traffic, by varying the application technique.
|
Density
(g/ml) |
Coverage
(sq ft/kg @ 40mils) |
Mix Ratio by
Weight 1 |
Mix Ratio by
Volume 1 |
Max/Min
Build/Coat (mils) |
| 1.69 |
40 |
5.6:1 |
3:1 |
150/20 |
Number of
Coats |
Working Time
(minutes) |
Minimum Application
Temp (F/C) |
Max Dry Operating
Temp (F/C) |
Dry to Touch
(hours) |
| 1 |
45 |
40/4 |
150/65 |
8 |
Recoat Time
(min/max hours) |
Functional Cure 2
(hours) |
Full Cure
(hours) |
Surface Preparation
Methods 3 |
pH Range 5 |
| 6/120 |
12 |
72 |
SSPC-1,3,11 |
|
|
|
